BUCKETS

Show sidebar

DIGGING BUCKETS
See all (274)

Digging bucket suitable for Lehnhoff MS21 / 1800 mm / (used):

Offered digging bucket suitable for MS21 is 1800 mm wideand has a capacity of 1490 liters.

Additional information:

Internal no.: L0306223
Type: digging bucket
Adapter: suitable for MS21
Width: 1800 mm
Opening dimension: 1100 mm
Capacity: 1490 litres

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Ejector bucket suitable for Atlas SMP T620 / 300 mm / (used):

Offered ejector bucket suitable for SMP T620 is 300 mm wide.

Additional information:

Internal no.: L08062211
Type: digging bucket
Adapter: suitable for SMP T620
Width: 300 mm
Opening dimension: 1000 mm
Capacity: about 270 l

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Digging bucket suitable for Lehnhoff MS10 / 600 mm / (NEW):

Offered new digging bucket suitable for MS10 is 600 mm wide.

Additional information:

Internal no.: L2706222
Type: digging bucket
Adapter: suitable for MS10
Width: 600 mm
Opening dimension: 950 mm
Volumen: 390 l

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Digging bucket suitable for Atlas SMP T620 / 850 mm / (used):

Offered digging bucket suitable for SMP T620 is 850 mm wide.

Additional information:

Internal no.: L0806224
Type: digging bucket
Adapter: suitable for SMP T620
Width: 850 mm
Opening dimension: 1150 mm
Volumen: ca. 0,99 cbm

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Digging bucket suitable for Lehnhoff MS21 / 1600 mm / cat. 3G:

Offered EH digging bucket suitable for an adapter MS21 to suit excavators from 17 to 23 tonnes is 1600 mm wide and has a capacity of 1540 liters.

Basic parameters:
1. Rear wall and sidewall made of steel S355J2, material thickness: 10 mm
2. Cutting edge made of HARDOX HB500, dimensions: 300×30 mm
3. Side cutting edge made of steel S3355J2 , material thickness: 25 mm
4. Sidecuter
5. Adapter*: suitable for MS21
6. Bucket teeth CAT-System J300
7. Wear protection plates on the sidewalls made of HARDOX HB500, material thickness: 10 mm
8. Outside bottom wear strips made of HARDOX HB500

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Digging bucket suitable for Lehnhoff MS03 / 500 mm / (used):

Offered digging bucket suitable for MS03 is 500 mm wideand has a capacity of 64 liters.

Additional information:

Internal no.: L0107221
Type: digging bucket
Adapter: suitable for MS03
Width: 500 mm
Opening dimension: 410 mm
Capacity: 64 litres

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Digging bucket suitable for Lehnhoff MS03SY / 700 mm / (used):

Offered digging bucket suitable for MS03 SY is 700 mm wide.

Additional information:

Internal no.: L0607221
Type: digging bucket
Adapter: suitable for MS03 SY
Width: 700 mm
Opening dimension: 670 mm
Volumen: ca. 0,211 cbm

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Digging bucket suitable for Lehnhoff MS21/25 / 1600 mm / cat. 4G:

Offered EH digging bucket suitable for an adapter MS21/25 to suit excavators from 24 to 30 tonnes is 1600 mm wide and has a capacity of 1700 liters.

Basic parameters:
1. Rear wall and sidewall made of steel S355J2, material thickness: 10 mm
2. Cutting edge made of HARDOX HB500, dimensions: 300×40 mm
3. Side cutting edge made of steel S3355J2 , material thickness: 25 mm
4. Sidecuter
5. Adapter*: suitable for MS21/25
6. Bucket teeth CAT-System J350
7. Wear protection plates on the sidewalls made of HARDOX HB500, material thickness: 10 mm
8. Outside bottom wear strips made of HARDOX HB500

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Digging bucket OilQuick OQ70/55 / 1200 mm / cat. 3G:

Offered EH digging bucket OilQuick OQ70/55 to suit excavators from 17 to 23 tonnes is 1200 mm wide and has a capacity of 1080 liters.

Basic parameters:
1. Adapter*: OilQuick OQ70/55
2. Rear wall and sidewall made of steel S355J2, material thickness: 10 mm
3. Cutting edge made of HARDOX HB500, dimensions: 30×300 mm
4. Side cutting edge made of steel S3355J2 , material thickness: 25 mm
5. Side cutting edge knife made of HARDOX HB400, material thickness: 10 mm
6. Wear protection plates on the sidewalls made of HARDOX HB400, material thickness: 10 mm
7. Outside bottom wear strips made of HARDOX HB400, material thickness: 10 mm
8. With 5 teeth CAT J300

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Digging bucket suitable for Verachtert CW30 / 1200 mm / cat. 3G:

Offered EH digging bucket suitable for CW30 to suit excavators from 17 to 23 tonnes is 1200 mm wide and has a capacity of 1080 liters.

Basic parameters:
1. Adapter*: suitable for CW30
2. Rear wall and sidewall made of steel S355J2, material thickness: 10 mm
3. Cutting edge made of HARDOX HB500, dimensions: 300×30 mm
4. Side cutting edge made of steel S3355J2 , material thickness: 25 mm
5. Side cutting edge knife made of HARDOX HB400, material thickness: 10 mm
6. Wear protection plates on the sidewalls made of HARDOX HB400, material thickness: 10 mm
7. Outside bottom wear strips made of HARDOX HB500, material thickness: 10 mm
8. With CAT J300

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

SKELETON BUCKETS
See all (74)

Shovel separator suitable for Lehnhoff MS08 / 1000 mm / (used):

Offered Skeleton bucket suitable for Lehnhoff MS08 is 1000 mm wide.

Additional information:
Internal no.: L0903221
Type: Shovel separator
Adapter: suitable for Lehnhoff MS08
Width: 1000 mm
Opening dimension: 650 mm
Weight: 637 kg
Capacity: approx. 420 l

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Skeleton bucket suitable for Volvo S60 / 1300 mm / cat. 2G:

Offered EH skeleton bucket suitable for S60 to suit excavators from 14 to 18 tonnes is 1300 mm wide and has a capacity of 727 liters.

Basic parameters:
1. Sidewall made of steel S355J2, material thickness: 8 mm
2. Side cutting edge made of steel S355J2, material thickness: 20 mm
3. Cutting edge made of HARDOX HB500, dimensions: 250×30 mm
4. Side cutting edge knife made of HARDOX HB500, material thickness: 8 mm
5. Ribs made of steel S355J2, material thickness: 15 mm
6. Adapter: suitable for S60
7. Welded teeth

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Skeleton bucket suitable for Lehnhoff MS03 / 800 mm / (used):

Offered Skeleton bucket suitable for Lehnhoff MS03 is 800 mm wide.

Additional information:
Internal no.: L2005221
Type: Skeleton bucket
Adapter: suitable for Lehnhoff MS03
Width: 800 mm
Opening dimension: 640 mm
Volume: ca. 0,23 cbm

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Skeleton bucket suitable for Verachtert CW05 / 800 mm / cat. 3K:

Offered EH skeleton bucket with a an adapter suitable for CW05 to suit excavators from 3 to 4 tonnes is 800 mm wide and has a capacity of 155 liters.

Basic parameters:
1. Sidewall made of steel S355J2, material thickness: 6 mm
2. Cutting edge made of HARDOX HB400, dimensions: 150×16 mm
3. Side cutting edge made of HARDOX HB400, material thickness: 5 mm
4. Ribs made of steel S355J2, dimensions: 20×20 mm
5. Distance between ribs: 50 mm
6. Adapter*: suitable for MS03
7. Bolted teeth (not welded)

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Skeleton bucket suitable for Lehnhoff MS21 / 1600 mm / cat. 4G:

EH skeleton bucket suitable for Lehnhoff MS21 to suit excavators from 24 to 30 tonnes is 1600 mm wide and has a capacity of 1336liters.

Basic parameters:
1. Adapter*: suitable for MS21
2. Sidewall made of steel S355J2, material thickness: 12 mm
3. Cutting edge made of HARDOX HB400, dimensions: 40×300 mm
4. Side cutting edge made of steel S3355J2 , material thickness: 25 mm
5. Side cutting edge knife made of HARDOX HB500, material thickness: 12 mm
6. Ribs made ofsteel S355J2, material thickness: 20 mm
7.  Welded teeth CAT J350

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Skeleton bucket without adapter / 600 mm / Kat. 1K:

Offered EH skeleton bucket without adapter to suit excavators to 2 tonnes is 600 mm wide and has a capacity of 60 liters.

Basic parameters:
1. Sidewall made of steel S355J2, material thickness: 6 mm
2. Cutting edge made of HARDOX HB500, dimensions: 110×12 mm
3. Side cutting edge made of HARDOX HB400, material thickness: 5 mm
4. Ribs made of steel S355J2, material thickness: 20 mm
5. Distance between ribs: 50 mm
6. Adapter*: without adapter
7. Bolted teeth (not welded)

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Skeleton bucket suitable for Verachtert CW20 / 1200 mm / cat. 2G:

Offered EH skeleton bucket suitable for Verachtert CW20 to suit excavators from 14 to 18 tonnes is 1200 mm wide and has a capacity of 661 liters.

Basic parameters:
1. Sidewall made of steel S355J2, material thickness: 8 mm
2. Side cutting edge made of steel S355J2, material thickness: 20 mm
3. Cutting edge made of HARDOX HB500, dimensions: 250×30 mm
4. Side cutting edge knife made of HARDOX HB500, material thickness: 8 mm
5. Ribs made of steel S355J2, material thickness: 15 mm
6. Adapter: suitable for CW20
7. Welded teeth CAT J300

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Skeleton bucket suitable for Lehnhoff / MS08 / 1200 mm / Kat. 5K:

Offered EH skeleton bucket with a an adapter suitable for MS08 to suit excavators from 5 to 9 tonnes is 1200 mm wide and has a capacity of 480 liters.

Basic parameters:
1. Sidewall made of steel S355J2, material thickness: 6 mm
2. Cutting edge made of HARDOX HB400, dimensions: 200×20 mm
3. Side cutting edge made of HARDOX HB400, material thickness: 5 mm
4. Ribs made of steel S355J2, dimensions: 20×20 mm
5. Distance between ribs: 50 mm
6. Adapter*: suitable for MS08
7. Bolted teeth (not welded)

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Land rake without adapter / 1000 mm / cat. 1K:

Land rake without adapter is 1000 mm long and can be applicable to excavators from 1,5 to 3 tonnes.

Basic parameters:
1. Conk 12 pieces made of  S355
2. Fork-clearance: 80 mm
3. Adapter*: without adapter

*Other adapters possible, suitable for e.g. Verachtert CW, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and bear the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Skeleton bucket suitable for Lehnhoff MS21/MS25 / 1400 mm / cat. 3G:

Offered EH skeleton bucket with a an adapter suitable for MS21/MS25 to suit excavators from 17 to 23 tonnes is 1400 mm wide and has a capacity of 1025 liters.

Basic parameters:
1. Sidewall made of steel S355J2, material thickness: 10 mm
2. Side cutting edge made of steel S355J2, material thickness: 25 mm
3. Cutting edge made of HARDOX HB500, dimensions: 250×30 mm
4. Side cutting edge knife made of HARDOX HB500, material thickness: 10 mm
5. Ribs made of steel S355J2, material thickness: 15 mm
6. Adapter: suitable for MS21
7. Welded teeth

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

DITCH CLEANING BUCKETS
See all (79)

Ditch cleaning bucket suitable for Lehnhoff MS03 / 1200 mm / cat. 1K:

Offered ditch cleaning bucket suitable for MS03 to suit excavators up to 2 tonnes is 1200 mm wide and has a capacity of 94 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2, material thickness: 5 mm
2. Cutting edge made of HARDOX HB400, dimensions: 110×12 mm
3. Side cutting edge made of HARDOX HB400, dimensions: 10-20x100mm
4. Adapter*: suitable for MS03
5. Water drainage holes

*Further adapters available, suitable for e.g. Lehnhoff, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

 

Ditch cleaning bucket suitable for Lehnhoff MS03 / 1400 mm / (NEW):

Offered new ditch cleaning bucket suitable for MS03 is 1400 mm wide and has a capacity of ca. 0,184 cbm.

Additional information:
Internal no.: L2706225
Type: ditch cleaning bucket
Adapter: suitable for MS03
Width: 1400 mm
Opening dimension: 400 mm
Capacity: ca. 0,184 cbn

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Ditch cleaning bucket suitable for Lehnhoff MS03 / 1200 mm / (used):

Offered ditch cleaning bucket suitable for MS03 is 1200 mm wide and has a capacity of 0,098 cbm.

Additional information:
Internal no.: L3006222
Type: ditch cleaning bucket
Adapter: suitable for MS03
Width: 1200 mm
Opening dimension: 320 mm
Capacity: ca. 0,098 cbn

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Ditch cleaning bucket suitable for Lehnhoff MS03 / 1200 mm / (used):

Offered ditch cleaning bucket suitable for MS03 is 1200 mm wide and has a capacity of 0,122 cbm.

Additional information:
Internal no.: L3006228
Type: ditch cleaning bucket
Adapter: suitable for MS03
Width: 1200 mm
Opening dimension: 320 mm
Capacity: ca. 0,122 cbm

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Ditch cleaning bucket suitable for Lehnhoff MS21 / 2000 mm / (used):

Offered ditch cleaning bucket suitable for MS21 is 2000 mm wide and has a capacity of ca. 1,04 cbm.

Additional information:
Internal no.: L3006226
Type: ditch cleaning bucket
Adapter: suitable for MS21
Width: 2000 mm
Opening dimension: 800 mm
Capacity: ca. 1,04 cbn

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Ditch cleaning bucket suitable for Lehnhoff MS01 / 1000 mm / (used):

Offered ditch cleaning bucket suitable for Lehnhoff MS01 is 1000 mm wide and has a capacity of ca. 0,072 cbm.

Additional information:
Internal no.: L1705223
Type: ditch cleaning bucket
Adapter: suitable for Lehnhoff MS01
Width: 1000 mm
Opening dimension: 300 mm
Capacity: ca. 0,072 cbm

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Ditch cleaning bucket suitable for Lehnhoff MS03 / 970 mm / (used):

Offered ditch cleaning bucket suitable for MS03 is 970 mm wide and has a capacity of about 106 l.

Additional information:
Internal no.: L1509222
Type: ditch cleaning bucket
Adapter: suitable for MS03
Width: 970 mm
Opening dimension: 350 mm
Capacity: about 106 l

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Ditch cleaning bucket suitable for Lehnhoff MS03 SY / 1500 mm / cat. 3K:

Offered EH ditch cleaning bucket suitable for MS03 SY to suit excavators from 3 to 4 tonnes is 1500 mm wide and has a capacity of 190 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2, material thickness: 6 mm
2. Cutting edge made of HARDOX HB400, dimensions: 150x16mm
3. Side cutting edge made of HARDOX HB400, dimensions: 20×100 mm
4. Adapter*: suitable for MS03 SY
5. Water drainage holes

*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and bear the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Ditch cleaning bucket suitable for Lehnhoff MS10 / 1800 mm / cat. 2G:

Offered EH ditch cleaning bucket with a an adapter suitable for MS10 to suit excavators from 11 to 14 tonnes is 1800 mm wide and has a capacity of 480 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2,
2. Cutting edge made of HARDOX HB400, dimensions: 150×20 mm
3. Side cutting edge made of steel S3355J2,
4. Adapter*: suitable for MS10
5. Flat bottom with cutback
6. Internal reinforcement

*Further adapters available, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and bear the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Ditch cleaning bucket suitable for Lehnhoff MS08 SY / 1800 mm / (used):

Offered ditch cleaning bucket suitable for Lehnhoff MS08SY is 1800 mm wide and has a capacity of 340 litres.

Additional information:
Internal no.: L1002225
Type: ditch cleaning bucket
Adapter: suitable for Lehnhoff MS08SY
Width: 1800 mm
Opening dimension: 500 mm
Capacity: 340 l

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

HYDR. DITCH CLEANING BUCKETS
See all (124)

Hydraulic ditch cleaning bucket suitable for Lehnhoff MS10 / 2000 mm / cat. 2G / with bolt-on cutting edge:

Offered EH hydraulic ditch cleaning bucket suitable for MS10 to suit excavators from 11 to 14 tonnes is 2000 mm wide and has a capacity of 531 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2
2. Cutting edge made of HARDOX HB500, dimensions: 200×20 mm
3. Bolt-on cutting edge made of HARDOX HB500, dimensions: 200×20 mm
4. Side cutting edge made of steel S355J2
5. Flat bottom with back cutting edge
6. Adapter*: suitable for MS10
7. Strengthening on the inside
8.  Two hydraulic cylinders from our own production
9. Replaceable bronze bushing

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S usw.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and bear the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Hydraulic ditch cleaning bucket suitable for Lehnhoff MS10 / 1800 mm / cat. 2G / with bolt-on cutting edge:

Offered EH hydarulic ditch cleaning bucket with a an adapter MS10 to suit excavators from 11 to 14 tonnes is 1800 mm wide and has a capacity of 480 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2
2. Cutting edge made of HARDOX HB500, dimensions: 200×20 mm
3. Bolt-on cutting edge made of HARDOX HB500, dimensions: 200×20 mm
4. Side cutting edge made of steel S355J2
5. Flat bottom with back cutting edge
6. Adapter*: suitable for MS10
7. Strengthening on the inside
8.  Two hydraulic cylinders from our own production
9. Replaceable bronze bushing

*Other adapters possible, e.g. Lehnhoff MS, Verachtert CW, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and bear the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Hydraulic ditch cleaning bucket suitable for OilQuick OQ65 / 2000 mm / cat. 3G / with bolt-on cutting edge:

Offered EH hydraulic ditch cleaning bucket to suit excavators from 14 to 19 tonnes is 2000 mm wide and has a capacity of 651 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2
2. Cutting edge made of HARDOX HB500, dimensions: 200×20 mm
3. Bolt-on cutting edge made of HARDOX HB500, dimensions: 200×20 mm
4. Side cutting edge made of steel S355J2
5. Flat bottom with back cutting edge
6. Adapter*: OilQuick OQ65 (equipped with: 2 plug 1/2”, 3 poly plug 3/4”)
7. Strengthening on the inside
8.  Two hydraulic cylinders
9. Replaceable bronze bushing

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and bear the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Hydraulic ditch cleaning bucket suitable for Lehnhoff MS03 / 1500 mm / (used):

Offered hydraulic ditch cleaning bucket with a an adapter MS03 is 1500 mm wide and has a capacity of ca. 0,25 cbm.

Additional information:
Internal no.: L2604221
Type: hydraulic ditch cleaning bucket
Adapter: MS03
Width: 1500 mm
Opening dimension: 510 mm
Capacity: ca. 0,25 cbm

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Hydraulic ditch cleaning bucket suitable for OilQuick OQ65 / 1800 mm / cat. 3G / with bolt-on cutting edge:

Offered EH hydraulic ditch cleaning bucket to suit excavators from 14 to 19 tonnes is 1800 mm wide and has a capacity of 583 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2
2. Cutting edge made of HARDOX HB500, dimensions: 200×20 mm
3. Bolt-on cutting edge made of HARDOX HB500, dimensions: 200×20 mm
4. Side cutting edge made of steel S355J2
5. Flat bottom with back cutting edge
6. Adapter*: OilQuick OQ65 (equipped with: 2 plug 1/2”, 3 poly plug 3/4”)
7. Strengthening on the inside
8.  Two hydraulic cylinders
9. Replaceable bronze bushing

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and bear the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Hydraulic ditch cleaning bucket without adapter / 2400 mm / cat. 5G / with bolt-on cutting edge:

Offered EH hydarulic ditch cleaning bucket without adaper to suit excavators from 24 to 29 tonnes is 2400 mm wide and has a capacity of 1059 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2
2. Cutting edge made of HARDOX HB500, dimensions: 250×30 mm
3. Bolt-on cutting edge made of HARDOX HB500, dimensions: 250×25 mm
4. Side cutting edge made of steel S355J2
5. Flat bottom with back cutting edge
6. Adapter*: –
7. Strengthening on the inside
8.  Two hydraulic cylinders from our own production
9. Replaceable bronze bushing

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and bear the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Hydraulic ditch cleaning bucket suitable for Verachtert CW45 S / 2200 mm / (used):

Offered hydraulic ditch cleaning bucket with a an adapter suitable for Verachtert CW45 S is 2200 mm wide and has a capacity of 1,11 cbm.

Additional information:
Internal no.: L2805212
Type: hydraulic ditch cleaning bucket
Adapter: suitable for Verachtert CW45 S
Width: 2200 mm
Opening dimension: 750 mm
Capacity: ca. 1,11 cbm

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Hydraulic ditch cleaning bucket Lehnhoff MS03 / 1500 mm / (used):

Offered hydraulic ditch cleaning bucket with a an adapter MS03 is 1500 mm wide and has a capacity of 224 liters.

Additional information:
Internal no.: L1205222
Type: hydraulic ditch cleaning bucket
Adapter: MS03
Width: 1500 mm
Opening dimension: 440 mm
Capacity: 224 l

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

Hydraulic ditch cleaning bucket suitable for OilQuick OQ70-55 / 2000 mm / cat. 4G / with bolt-on cutting edge:

Offered EH hydraulic ditch cleaning bucket to suit excavators from 19 to 24 tonnes is 2000 mm wide and has a capacity of 722 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2
2. Cutting edge made of HARDOX HB500, dimensions: 200×20 mm
3. Bolt-on cutting edge made of HARDOX HB500, dimensions: 200×20 mm
4. Side cutting edge made of steel S355J2
5. Flat bottom with back cutting edge
6. Adapter*: OilQuick OQ70-55 (equipped with: 2 plug 1/2”, 2 poly plug 3/4”, 2 poly plug 1”)
7. Strengthening on the inside
8.  Two hydraulic cylinders
9. Replaceable bronze bushing

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and bear the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Hydraulic ditch cleaning bucket suitable for OilQuick OQ80 / 2400 mm / cat. 6G /with bolt-on cutting edge:

Offered EH hydarulic ditch cleaning bucket o suit excavators from 29 to 36 tonnes is 2400 mm wide and has a capacity of 1600 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2
2. Cutting edge made of HARDOX HB500, dimensions: 300×30 mm
3. Bolt-on cutting edge made of HARDOX HB500, dimensions: 250×25 mm
4. Side cutting edge made of steel S355J2
5. Flat bottom with back cutting edge
6. Adapter*: OQ80 (equipped with: 2 plug 1/2”, 2 poly plug 3/4”, 2 poly plug 1”)
7. Strengthening on the inside
8.  Two hydraulic cylinders from our own production
9. Replaceable bronze bushing

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and bear the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

CABLE BUCKETS
See all (10)

Cable bucket suitable for Lehnhoff MS08 SY / 300 mm / cat. 3K:

Offered EH cable bucket suitable for MS08 SY to suit excavators from 5 up to 9 tonnes is 300 mm wide and has a capacity of 130 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2, material thickness: 6 mm
2. Cutting edge made of HARDOX HB500, dimensions: 200×20 mm
3. Wear protection made of steel Hardox HB500, material thickness: 15 mm
4. Adapter*:  suitable for MS08 SY

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Cable bucket suitable for Lehnhoff MS03 / 200 mm / cat. 1K:

Offered EH cable bucket suitable for Lehnhoff MS03 to suit excavators up from 2 to 3 tonnes is 200 mm wide and has a capacity of 45 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2, material thickness: 5 mm
2. Cutting edge made of HARDOX HB500, dimensions: 150×16 mm
3. Wear protection made of steel Hardox HB500, material thickness: 12 mm
4. Adapter*: suitable for MS03

Due to low stock, it is possible that you receive this product with the mouting system suitable for MS03 SYMLOCK.

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Cable bucket suitable for Lehnhoff MS01 / 200 mm / cat. 1K:

Offered EH cable bucket suitable for Lehnhoff MS01 to suit excavators up to 2 tonnes is 200 mm wide and has a capacity of 38 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2, material thickness: 5 mm
2. Cutting edge made of HARDOX HB500, dimensions: 150×16 mm
3. Wear protection made of steel Hardox HB500, material thickness: 8 mm
4. Adapter*: suitable for MS01

Due to low stock, it is possible that you receive this product with the mouting system suitable for MS01 SYMLOCK.

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Cable bucket suitable for Lehnhoff MS01 SY / 200 mm / cat. 1K:

Offered EH cable bucket suitable for Lehnhoff MS01 SY to suit excavators up to 2 tonnes is 200 mm wide and has a capacity of 38 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2, material thickness: 5 mm
2. Cutting edge made of HARDOX HB500, dimensions: 150×16 mm
3. Wear protection made of steel Hardox HB500, material thickness: 8 mm
4. Adapter*: suitable for MS01 SY

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Cable bucket suitable for Volvo S40 / 450 mm / cat. 4K / special item:

Offered EH cable bucket suitable for Volvo S40 to suit excavators from 4 up to 6 tonnes is 450 mm wide and has a capacity of 90 liters.

Basic parameters:
1. Adapter*: suitable for Volvo S40
2. Rear wall and side wall made of steel S355J2
3. Cutting edge made of HARDOX HB500
4. Wear protection made of steel Hardox HB500
5. With CAT J200 teeth

*Other adapters possible, suitable for e.g. Verachtert CW, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Cable bucket suitable for Volvo S40 / 500 mm / cat. 2K / special item:

Offered cable bucket suitable for Volvo S40 to suit excavators from 2 to 4 tonnes is 500 mm wide and has a capacity of 65 liters.

Basic parameters:
1. Adapter*: suitable for Volvo S40
2. wall and side wall made of steel S355J2
3. Cutting edge made of HARDOX HB500
4. Wear protection made of steel Hardox HB500
5. With CAT J200 teeth

*Other adapters possible, suitable for e.g. Verachtert CW, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Cable bucket suitable for Volvo S40 / 800 mm / cat. 4K / special item:

Offered cable bucket with suitable for Volvo S40 to suit excavators from 4 up to 6 tonnes is 800 mm wide and has a capacity of 183 liters.

Basic parameters:
1. Adapter*: suitable for Volvo S40
2. Rear wall and side wall made of steel S355J2
3. Cutting edge made of HARDOX HB500
4. Wear protection made of steel Hardox HB500
5. With CAT J200 teeth

*Other adapters possible, suitable for e.g. Verachtert CW, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Cable bucket suitable for Lehnhoff MS08 / 300 mm / cat. 3K:

Offered EH cable bucket suitable for MS08 to suit excavators from 5 up to 9 tonnes is 300 mm wide and has a capacity of 130 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2, material thickness: 6 mm
2. Cutting edge made of HARDOX HB500, dimensions: 200×20 mm
3. Wear protection made of steel Hardox HB500, material thickness: 15 mm
4. Adapter*:  suitable for MS08

Due to low stock, it is possible that you receive this product with the mouting system suitable for MS08 SYMLOCK.

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Cable bucket pin-on / 300 mm / cat. 2K:

Offered EH cable pin-on bucket to suit excavators from 2 up to 6 tonnes is 300 mm wide and has a capacity of 52 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2, material thickness: 6 mm
2. Cutting edge made of HARDOX HB500, dimensions: 200×20 mm
3. Wear protection made of steel Hardox HB500, material thickness: 15 mm
4. Adapter*: pin-on

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Cable bucket suitable for Verachtert CW05 / 100 mm / cat. 1K:

Offered EH cable bucket suitable for CW05 to suit excavators up to 2 tonnes is 100 mm wide and has a capacity of 18 liters.

Basic parameters:
1. Rear wall and side wall made of steel S355J2, material thickness: 5 mm
2. Cutting edge made of HARDOX HB500, dimensions: 150×16 mm
3. Wear protection made of steel Hardox HB500, material thickness: 8 mm
4. Adapter*: suitable for CW05

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

HYDRAULIC DIGGING BUCKETS
See all (2)

Hydraulic digging bucket OilQuick OQ70-55 / 1800 mm / cat. 5G / with bolt-on cutting edge:

Offered EH hydarulic digging bucket OilQuick OQ70-55 to suit excavators from 31 to 40 tonnes is 1800 mm wide and has a capacity of 2200 liters.

Basic parameters:
1. Rear wall made of HARDOX HB400, material thickness: 12 mm
2. Side wall made of HARDOX HB400, material thickness: 12 mm
3. Cutting edge made of HARDOX HB500, dimensions: 300×40 mm
4. Side cutting edge made of HARDOX HB400, material thickness: 25 mm
5. Wear protection plates on the sidewalls, material thickness: 12 mm
6. Bolt-on cutting edge made of HARDOX HB500, dimensions: 330×30 mm
7. Adapter*: OilQuick OQ70-55 (equipped with: 2 plug 1/2”, 2 poly plug 3/4”, 2 poly plug 1”)

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and bear the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Digging bucket hydraulic suitable for Verachtert CW45 S / 1600 mm / (used):

Offered digging bucket hydraulic suitable for CW45 S is 1600 mm wide.

Additional information:

Internal no.: L1408201
Type: digging bucket hydraulic
Adapter: suitable for CW45 S
Width: 1600 mm
Opening dimension: 1100 mm
Volumen: ca. 1,7 cbm

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

 

ROCK SPOONS
See all (3)

Heavy duty bucket suitable for OilQuick OQ80 / 1600 mm / cat. 5G:

The EH heavy duty bucket suitable for OilQuick OQ80 to suit excavators from 31 to 40 tonnes is 1600 mm wide and has a capacity of 2133 liters.

Basic parameters:
1. Adapter*: pin-on (80/360/510 mm)
2. Rear wall and sidewall made of HARDOX HB400, material thickness: 10 mm
3. Cutting edge made of HARDOX HB500, dimensions: 300×45 mm
4. Side cutting edge made  of HARDOX HB400, Materialstärke: 30 mm
5. Wear protection plates on the sidewalls made of HARDOX HB400, material thickness: 10 mm
6. Outside bottom wear strips made of HARDOX HB400, material thickness: 12 mm
7. Reinforcement strip of HARDOX HB500, material thickness: 15 mm
8. Side protection
9. Edge protection
10. CAT J400 teeth

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller,  Volvo S, Liebherr SW, Atlas SMP usw.

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Heavy duty bucket suitable for OilQuick OQ80 / 1600 mm / cat. 5G:

The EH heavy duty bucket suitable for OilQuick OQ80 to suit excavators from 31 to 40 tonnes is 1600 mm wide and has a capacity of 2133 liters.

Basic parameters:
1. Adapter*: suitable for OilQuick OQ80
2. Rear wall and sidewall made of HARDOX HB400, material thickness: 10 mm
3. Cutting edge made of HARDOX HB500, dimensions: 300×40 mm
4. Side cutting edge made  of HARDOX HB400, Materialstärke: 35 mm
5. Wear protection plates on the sidewalls made of HARDOX HB400, material thickness: 12 mm
6. Outside bottom wear strips made of HARDOX HB500, material thickness: 12 mm
7. Reinforcement strip of HARDOX HB500, material thickness: 15 mm
8. Side protection
9. Edge protection
10. ESCO teeth

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller,  Volvo S, Liebherr SW, Atlas SMP usw.

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Heavy duty bucket OilQuick OQ 70-55 / 1300 mm / cat. 3G:

The EH heavy duty bucket OQ70-55 to suit excavators from 17 to 23 tonnes is 1300 mm wide and has a capacity of 1040 liters.

Basic parameters:
1. Adapter*: OilQuick OQ70-55
2. Rear wall and sidewall made of HARDOX HB400, material thickness: 10 mm
3. Cutting edge made of HARDOX HB500, dimensions: 250×30 mm
4. Side cutting edge made  of HARDOX HB400, Materialstärke: 25 mm
5. Wear protection plates on the sidewalls made of HARDOX HB400, material thickness: 10 mm
6. Outside bottom wear strips made of HARDOX HB500, material thickness: 10 mm
7. Reinforcement strip of HARDOX HB500, material thickness: 15 mm
8. Side protection
9. Edge protection
10. ESCO teeth

*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

UNIVERSAL BUCKETS
See all (15)

Universal bucket suitable for Lehnhoff MS01 SY / 800 mm / cat. 1K:

Offered EH universal bucket with an adapter suitable for MS01 SY to suit excavators up to 2 tonnes is 800 mm wide and has a capacity of 89 L.

Basic parameters:
1. Rear wall and side walls made of steel S355J2
2. Side cutting edges made of HARDOX HB400
4. Cutting edge made of HARDOX HB500
5. Adapter*: suitable for MS01 SY

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Universal bucket suitable for Volvo S60 / 1600 mm / cat. 3G :

Offered EH universal bucket with an adapter suitable for S60 to suit excavators from 14 to 18 tonnes is 1600 mm wide and has a capacity of 716 L.

Basic parameters:
1. Rear wall and side walls made of steel S355J2
2. Side cutting edges made of HARDOX HB400
4. Cutting edge made of HARDOX HB500
5. Adapter*: suitable for S60

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP etc.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Universal bucket suitable for Lehnhoff MS03 SY / 1200 mm / cat. 2K:

Offered EH universal bucket with an adapter suitable for MS03 SY to suit excavators from 2 to 4 tonnes is 1200 mm wide and has a capacity of 235 L.

Basic parameters:
1. Rear wall and side walls made of steel S355J2
2. Side cutting edges made of HARDOX HB400
4. Cutting edge made of HARDOX HB500
5. Adapter*: suitable for MS03 SY

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Universal bucket suitable for Lehnhoff MS00 SY / 1000 mm / cat. 2K:

Offered EH universal bucket with an adapter suitable for MS03 SY to suit excavators from 2 to 4 tonnes is 1000 mm wide and has a capacity of 173 L.

Basic parameters:
1. Rear wall and side walls made of steel S355J2
2. Side cutting edges made of HARDOX HB400
4. Cutting edge made of HARDOX HB500
5. Adapter*: suitable for MS03 SY

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Universal bucket suitable for Lehnhoff MS08 SY / 1400 mm / cat. 4K:

Offered EH universal bucket with an adapter suitable for MS08 SY to suit excavators from 6 to 9 tonnes is 1400 mm wide and has a capacity of 393 L.

Basic parameters:
1. Rear wall and side walls made of steel S355J2
2. Side cutting edges made of HARDOX HB400
4. Cutting edge made of HARDOX HB500
5. Adapter*: suitable for MS08 SY

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Universal bucket suitable for Lehnhoff MS03 SY / 1300 mm / cat. 3K:

Offered EH universal bucket with an adapter suitable for MS03 SY to suit excavators from 4 to 6 tonnes is 1300 mm wide and has a capacity of 290 L.

Basic parameters:
1. Rear wall and side walls made of steel S355J2
2. Side cutting edges made of HARDOX HB400
4. Cutting edge made of HARDOX HB500
5. Adapter*: suitable for MS03 SY

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Universal bucket suitable for Volvo S60 / 1600 mm / cat. 2G:

Offered EH universal bucket with an adapter suitable for S60 to suit excavators from 10 to 14 tonnes is 1600 mm wide and has a capacity of 399 L.

Basic parameters:
1. Rear wall and side walls made of steel S355J2
2. Side cutting edges made of HARDOX HB400
4. Cutting edge made of HARDOX HB500
5. Adapter*: suitable for S60

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP etc.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Universal bucket suitable for Volvo S40 / 1300 mm / cat. 3K:

Offered EH universal bucket with an adapter suitable for S40 to suit excavators from 4 to 6 tonnes is 1300 mm wide and has a capacity of 290 L.

Basic parameters:
1. Rear wall and side walls made of steel S355J2
2. Side cutting edges made of HARDOX HB400
4. Cutting edge made of HARDOX HB500
5. Adapter*: suitable for S40

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Universal bucket suitable for Lehnhoff MS03 / 1200 mm / cat. 2K:

Offered EH universal bucket with an adapter suitable for MS03 to suit excavators from 2 to 4 tonnes is 1200 mm wide and has a capacity of 235 L.

Basic parameters:
1. Rear wall and side walls made of steel S355J2
2. Side cutting edges made of HARDOX HB400
4. Cutting edge made of HARDOX HB500
5. Adapter*: suitable for MS03

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.

Universal bucket suitable for Volvo S40 / 1200 mm / cat. 2K:

Offered EH universal bucket with an adapter suitable for S40 to suit excavators from 2 to 4 tonnes is 1200 mm wide and has a capacity of 235 L.

Basic parameters:
1. Rear wall and side walls made of steel S355J2
2. Side cutting edges made of HARDOX HB400
4. Cutting edge made of HARDOX HB500
5. Adapter*: suitable for S40

*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.

 

We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.

More information about our products can be found here.

You can also find videos about our excavator attachments on our YouTube channel.

Product images are for illustrative purposes only and may differ from the actual product.