EH Sorting grab with the rotatins system THUMM 615 H suitable for Volvo S60 for the excavator class from 11 to 18 tonnes.
Basic parameters:
1. Jaws made of HARDOX HB400
2. Other elements made of steel S355J2
3. Adapter*: suitable for Volvo S60
4. High clamping force
5. Hochbelastbares THUMM Rotationsystem
6. Protected arrangement of hydraulic components including cylinders
7. Easily accessible lubrication points for easy routine maintenance
8. Strippable replaceable abrasion resistant cutting edges
9. Load-holding valve keeps the pressure in the cylinder when the hose is damaged
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
Technical specification – grab:
1. Cutting width: 800 mm
2. Opening dimension: 1717 mm
3. Closing force: 40 kN/bar
4. Operating pressure: 320 bar
5. Litre capacity: 150 l/min
Technical specification – rotating system: download PDF
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The grab is suitable for the excavator class from 12 to 20 tonnes.
Basic parameters:
1. 2 rotary motors with 2 gears
2. Shells made of curved and pressed Hardox plates with oval holes
3. Reversible blade (exchangeable)
4. Protection of the components and the base body
5. Exposed cylinders, no rubbing of the hydraulic hoses. Cylinders with end cushioning
6. Greater gripping force A total of only 4 bearing pins
7. Pivot points sealed by Metal Seals®
8. Hardened and chrome-plated bearing pins
9. Easy to reach lubrication points
10. Closed, dust-protected slewing ring reinforced carrier sheet for slewing ring
Technical specification – grab:
1. Weight: 1140 kg
2. Volume: 500 liters
3. Cutting width: 800 mm
4. Opening dimension: 1950 mm
4. Operating pressure: 350 Bar
5. Max. oil flow: 120 l/min
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Volvo S, Liebherr SW usw.
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The EH sorting grab suitable for Volvo S60 for the excavator class from 11 to 18 tonnes.
Basic parameters:
1. Jaws made of HARDOX HB400
2. Other elements made of steel S355J2
3. Adapter*: suitabe for Volvo S60
4. High clamping force
5. Protected arrangement of hydraulic components including cylinders
6. Easily accessible lubrication points for easy routine maintenance
7. Strippable replaceable abrasion resistant cutting edges
8. Load-holding valve keeps the pressure in the cylinder when the hose is damaged
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.
Technical specification – grab:
1. Cutting width: 800 mm
2. Opening dimension: 1717 mm
3. Closing force: 40 kN/Bar
4. Operating pressure: 320 Bar
5. Litre capacity: 150 L/min
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The grab is suitable for the excavator class from 17 to 28 tonnes.
Basic parameters:
1. 2 rotary motors with 2 gears
2. Shells made of curved and pressed Hardox plates with oval holes
3. Reversible blade (exchangeable)
4. Protection of the components and the base body
5. Exposed cylinders, no rubbing of the hydraulic hoses. Cylinders with end cushioning
6. Greater gripping force A total of only 4 bearing pins
7. Pivot points sealed by Metal Seals®
8. Hardened and chrome-plated bearing pins
9. Easy to reach lubrication points
10. Closed, dust-protected slewing ring reinforced carrier sheet for slewing ring
Technical specification – grab:
1. Weight: 1940 kg
2. Volume: 800 liters
3. Cutting width: 1000 mm
4. Opening dimension: 2100 mm
4. Operating pressure: 350 Bar
5. Max. oil flow: 150 l/min
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Volvo S, Liebherr SW usw.
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
EH Sorting grab with rotator suitable for MS03 suitable for the excavator class from 3 up to 6 tonnes.
Basic parameters:
1. Jaws made of steel S355J2
2. Other elements made of steel S355J2
3. Adapter*: suitable for MS03
4. High clamping force
5. Loadable rotating system
6. Protected arrangement of hydraulic components including cylinders
7. Easily accessible lubrication points for easy routine maintenance
8. Load-holding valve keeps the pressure in the cylinder when the hose is damaged
9. Inc. hydraulic set (without couplings), hose length: 2.000 mm
10. With side covers
Technical specification – grab:
1. Cutting width: 500 mm
2. Opening width: 1.160 mm
Technical specification – rotator:
1. Max.static load: 7.000 kg
2. Max. dynamic load: 3.500 kg
3. Torque: 1.850 Nm
4. Min. Liter output: 25 l / min
5. Max. working pressure: 250 bar
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The EH sorting grab suitable for CW10 for the excavator class from 6 to 11 tonnes.
Basic parameters:
1. Jaws made of HARDOX HB400
2. Other elements made of steel S355J2
3. Adapter*: suitable for CW10
4. High clamping force
5. Protected arrangement of hydraulic components including cylinders
6. Easily accessible lubrication points for easy routine maintenance
7. Strippable replaceable abrasion resistant cutting edges
8. Load-holding valve keeps the pressure in the cylinder when the hose is damaged
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
Technical specification – grab:
1. Cutting width: 600 mm
2. Opening dimension: 1400 mm
3. Closing force: 23,5 kN/Bar
4. Operating pressure: 320 Bar
5. Litre capacity: 50 L/min
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The grab is suitable for the excavator class from 12 to 20 tonnes.
Basic parameters:
1. 2 rotary motors with 2 gears
2. Shells made of curved and pressed Hardox plates with oval holes
3. Reversible blade (exchangeable)
4. Protection of the components and the base body
5. Exposed cylinders, no rubbing of the hydraulic hoses. Cylinders with end cushioning
6. Greater gripping force A total of only 4 bearing pins
7. Pivot points sealed by Metal Seals®
8. Hardened and chrome-plated bearing pins
9. Easy to reach lubrication points
10. Closed, dust-protected slewing ring reinforced carrier sheet for slewing ring
Technical specification – grab:
1. Weight: 1140 kg
2. Volume: 500 liters
3. Cutting width: 800 mm
4. Opening dimension: 1950 mm
4. Operating pressure: 350 Bar
5. Max. oil flow: 120 l/min
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Volvo S, Liebherr SW usw.
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The EH sorting grab suitable for Verachtert CW20 for the excavator class from 11 to 18 tonnes.
Basic parameters:
1. Jaws made of HARDOX HB400
2. Other elements made of steel S355J2
3. Adapter*: suitabe for Verachtert CW20
4. High clamping force
5. Protected arrangement of hydraulic components including cylinders
6. Easily accessible lubrication points for easy routine maintenance
7. Strippable replaceable abrasion resistant cutting edges
8. Load-holding valve keeps the pressure in the cylinder when the hose is damaged
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.
Technical specification – grab:
1. Cutting width: 800 mm
2. Opening dimension: 1717 mm
3. Closing force: 40 kN/Bar
4. Operating pressure: 320 Bar
5. Litre capacity: 150 L/min
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The grab is suitable for the excavator class from 20 to 28 tonnes.
Basic parameters:
1. 2 rotary motors with 2 gears
2. Shells made of curved and pressed Hardox plates with oval holes
3. Reversible blade (exchangeable)
4. Protection of the components and the base body
5. Exposed cylinders, no rubbing of the hydraulic hoses. Cylinders with end cushioning
6. Greater gripping force A total of only 4 bearing pins
7. Pivot points sealed by Metal Seals®
8. Hardened and chrome-plated bearing pins
9. Easy to reach lubrication points
10. Closed, dust-protected slewing ring reinforced carrier sheet for slewing ring
Technical specification – grab:
1. Weight: 2180 kg
2. Volume: 850 liters
3. Cutting width: 1200 mm
4. Opening dimension: 2100 mm
4. Operating pressure: 350 Bar
5. Max. oil flow: 170 l/min
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Volvo S, Liebherr SW usw.
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
EH Sorting grab with the rotating system THUMM 602F suitable for CW05 suitable for the excavator class from 1,5 to 3 tonnes.
Basic parameters:
1. Jaws made of HARDOX HB400
2. Other elements made of steel S355J2
3. Adapter*: suitable for CW05
4. High clamping force
5. Hochbelastbares THUMM Rotationsystem
6. Protected arrangement of hydraulic components including cylinders
7. Easily accessible lubrication points for easy routine maintenance
8. Strippable replaceable abrasion resistant cutting edges
9. Load-holding valve keeps the pressure in the cylinder when the hose is damaged
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
Technical specification – grab:
1. Cutting width: 350 mm
2. Opening dimension: 840 mm
3. Closing force: 11,8 kN/bar
4. Operating pressure: 320 bar
5. Litre capacity: 10 l/min
Technical specification – rotating system: download PDF
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The grab is suitable for the excavator class from 12 to 20 tonnes.
Basic parameters:
1. 2 rotary motors with 2 gears
2. Shells made of curved and pressed Hardox plates with oval holes
3. Reversible blade (exchangeable)
4. Protection of the components and the base body
5. Exposed cylinders, no rubbing of the hydraulic hoses. Cylinders with end cushioning
6. Greater gripping force A total of only 4 bearing pins
7. Pivot points sealed by Metal Seals®
8. Hardened and chrome-plated bearing pins
9. Easy to reach lubrication points
10. Closed, dust-protected slewing ring reinforced carrier sheet for slewing ring
Technical specification – grab:
1. Weight: 1140 kg
2. Volume: 500 liters
3. Cutting width: 800 mm
4. Opening dimension: 1950 mm
4. Operating pressure: 350 Bar
5. Max. oil flow: 120 l/min
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Volvo S, Liebherr SW usw.
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
More information:
Internal number: L1005216
Adapter: suitable for CW40
Shell width: 1.900 mm
Opening dimension: 1.000 mm
Weight: 2.030 kg
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
The grab is suitable for the excavator class from 17 to 28 tonnes.
Basic parameters:
1. 2 rotary motors with 2 gears
2. Shells made of curved and pressed Hardox plates with oval holes
3. Reversible blade (exchangeable)
4. Protection of the components and the base body
5. Exposed cylinders, no rubbing of the hydraulic hoses. Cylinders with end cushioning
6. Greater gripping force A total of only 4 bearing pins
7. Pivot points sealed by Metal Seals®
8. Hardened and chrome-plated bearing pins
9. Easy to reach lubrication points
10. Closed, dust-protected slewing ring reinforced carrier sheet for slewing ring
Technical specification – grab:
1. Weight: 1940 kg
2. Volume: 800 liters
3. Cutting width: 1000 mm
4. Opening dimension: 2100 mm
4. Operating pressure: 350 Bar
5. Max. oil flow: 150 l/min
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Volvo S, Liebherr SW usw.
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
EH Demolition grab with the rotating system THUMM 605H suitable for Verachtert CW05 for the excavator class from 3 to 6 tonnes.
Basic parameters:
1. Jaws made of HARDOX HB400
2. Other elements made of steel S355J2
3. Adapter*: suitable for CW05
4. High clamping force
5. Hochbelastbares THUMM Rotationsystem
6. Protected arrangement of hydraulic components including cylinders
7. Easily accessible lubrication points for easy routine maintenance
8. Strippable replaceable abrasion resistant cutting edges
9. Load-holding valve keeps the pressure in the cylinder when the hose is damaged
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
Technical specification – grab:
1. Cutting width: 500 mm
2. Opening dimension: 1130 mm
3. Closing force: 19,6 kN/bar
4. Operating pressure: 320 bar
5. Litre capacity: 35 l/min
Technical specification – rotating system: download PDF
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The EH demolition grab suitable for S60 suitable for the excavator class from 11 to 18 tonnes.
Basic parameters:
1. Jaws made of HARDOX HB400
2. Other elements made of steel S355J2
3. Adapter*: suitabe for S60
4. High clamping force
5. Protected arrangement of hydraulic components including cylinders
6. Easily accessible lubrication points for easy routine maintenance
7. Strippable replaceable abrasion resistant cutting edges
8. Load-holding valve keeps the pressure in the cylinder when the hose is damaged
*Further adapters available, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
Technical specification – grab:
1. Cutting width: 800 mm
2. Opening dimension: 1717 mm
3. Closing force: 40 kN/Bar
4. Operating pressure: 320 Bar
5. Litre capacity: 150 L/min
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The EH demolition grab suitable for MS08 suitable for the excavator class from 6 to 11 tonnes.
Basic parameters:
1. Jaws made of HARDOX HB400
2. Other elements made of steel S355J2
3. Adapter*: suitabe for MS08
4. High clamping force
5. Protected arrangement of hydraulic components including cylinders
6. Easily accessible lubrication points for easy routine maintenance
7. Strippable replaceable abrasion resistant cutting edges
8. Load-holding valve keeps the pressure in the cylinder when the hose is damaged
*Weitere Aufnahmen möglich, z.B. passend für Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
Technical specification – grab:
1. Cutting width: 600 mm
2. Opening dimension: 1400 mm
3. Closing force: 23,5 kN/Bar
4. Operating pressure: 320 Bar
5. Litre capacity: 50 L/min
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The grab is suitable for the excavator class from 12 to 20 tonnes.
Basic parameters:
1. 2 rotary motors with 2 gears
2. Shells made of curved and pressed Hardox plates with oval holes
3. Reversible blade (exchangeable)
4. Protection of the components and the base body
5. Exposed cylinders, no rubbing of the hydraulic hoses. Cylinders with end cushioning
6. Greater gripping force A total of only 4 bearing pins
7. Pivot points sealed by Metal Seals®
8. Hardened and chrome-plated bearing pins
9. Easy to reach lubrication points
10. Closed, dust-protected slewing ring reinforced carrier sheet for slewing ring
Technical specification – grab:
1. Weight: 1140 kg
2. Volume: 500 liters
3. Cutting width: 800 mm
4. Opening dimension: 1950 mm
4. Operating pressure: 350 Bar
5. Max. oil flow: 120 l/min
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Volvo S, Liebherr SW usw.
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The grab is suitable for the excavator class from 20 to 28 tonnes.
Basic parameters:
1. 2 rotary motors with 2 gears
2. Shells made of curved and pressed Hardox plates with oval holes
3. Reversible blade (exchangeable)
4. Protection of the components and the base body
5. Exposed cylinders, no rubbing of the hydraulic hoses. Cylinders with end cushioning
6. Greater gripping force A total of only 4 bearing pins
7. Pivot points sealed by Metal Seals®
8. Hardened and chrome-plated bearing pins
9. Easy to reach lubrication points
10. Closed, dust-protected slewing ring reinforced carrier sheet for slewing ring
Technical specification – grab:
1. Weight: 2180 kg
2. Volume: 850 liters
3. Cutting width: 1200 mm
4. Opening dimension: 2100 mm
4. Operating pressure: 350 Bar
5. Max. oil flow: 170 l/min
*Further adapters available, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Volvo S, Liebherr SW usw.
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The EH demolition grab suitable for CW10 suitable for the excavator class from 6 to 11 tonnes.
Basic parameters:
1. Jaws made of HARDOX HB400
2. Other elements made of steel S355J2
3. Adapter*: suitabe for CW10
4. High clamping force
5. Protected arrangement of hydraulic components including cylinders
6. Easily accessible lubrication points for easy routine maintenance
7. Strippable replaceable abrasion resistant cutting edges
8. Load-holding valve keeps the pressure in the cylinder when the hose is damaged
*Weitere Aufnahmen möglich, z.B. passend für Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
Technical specification – grab:
1. Cutting width: 600 mm
2. Opening dimension: 1400 mm
3. Closing force: 23,5 kN/Bar
4. Operating pressure: 320 Bar
5. Litre capacity: 50 L/min
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
Der EH Abbruchgreifer mit Thumm Rotator-Typ 609H passend für CW10 für die Baggerklasse von 6 bis 10 Tonnen geeignet.
Standardausführung:
1. Schalen aus HARDOX HB400 hergestellt
2. Sonstige Elemente aus Stahl S355J2 gefertigt
3. Aufnahme*: passend für CW10
4. Hohe Schließkraft
5. Hochbelastbares THUMM Rotationsystem
6. Geschützte Anordnung der Hydraulikkomponenten einschließlich Zylinder
7. Leicht zugängliche Schmierstellen für eine einfache Routinewartung
8. Strebenmäßig auswechselbare abriebfeste Schneidkanten
9. Lasthalteventil hält bei Schlauchschaden den Druck im Zylinder
*Weitere Aufnahmen möglich, z.B. passend für Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
Technische Daten – Greifer:
1. Schnittbreite: 600 mm
2. Öffnungsweite: 1400 mm
3. Schließkraft: 23,5 kN/Bar
4. Betriebsdruck: 320 Bar
5. Literleistung: 50 L/min
Technische Daten – Rotator: PDF Herunterladen
Alle von uns hergestellten Anbauteile haben eine 12-monatige Garantie auf die Schweißnähte.
Sie werden mit einem Typenschild und einer CE Kennzeichnung ausgeliefert.
Mehr Informationen über unsere Anbauteile finden Sie hier.
Videos über unsere Anbauteile finden Sie auch auf YouTube.
Produktbilder sind nur für illustrative Zwecke und können vom tatsächlichen Produkt abweichen.
Timber grab with the rotator THUMM 615H suitable for MS10 suitable for the excavator class from 12 to 18 tonnes.
Basic parameters:
1. Jaws made of HARDOX HB400
2. Other elements made of steel S355J2
3. Adapter*: suitable for MS10
4. THUMM Rotationsystem
5. Protected arrangement of hydraulic components including cylinders
6. Easily accessible lubrication points for easy routine maintenance
7. Strippable replaceable abrasion resistant cutting edges
8. Load-holding valve keeps the pressure in the cylinder when the hose is damaged
Technical specification – grab:
1. Closing force: 45 kN / 320 Bar
2. Operating pressure: 320 Bar
3. Litre capacity: 150 L/min
Technical specification – rotator: download PDF
Standard color is black/orange – other colors like green, red and grey are available as well.
Please choose the color while placing an order.
Please note that if you choose a color other than grey, the delivery time will be extended by 2 to 6 weeks.
*Further adapters available, e.g. suitable for Lehnhoff MS Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.Product images are for illustrative purposes only and may differ from the actual product.
Timber grab with the rotator THUMM 615H suitable for MS10 suitable for the excavator class from 12 to 18 tonnes.
Basic parameters:
1. Jaws made of HARDOX HB400
2. Other elements made of steel S355J2
3. Adapter*: suitable for S60
4. THUMM Rotationsystem
5. Protected arrangement of hydraulic components including cylinders
6. Easily accessible lubrication points for easy routine maintenance
7. Strippable replaceable abrasion resistant cutting edges
8. Load-holding valve keeps the pressure in the cylinder when the hose is damaged
Technical specification – grab:
1. Closing force: 45 kN / 320 Bar
2. Operating pressure: 320 Bar
3. Litre capacity: 150 L/min
Technical specification – rotator: download PDF
Standard color is black/orange – other colors like green, red and grey are available as well.
Please choose the color while placing an order.
Please note that if you choose a color other than grey, the delivery time will be extended by 2 to 6 weeks.
*Further adapters available, e.g. suitable for Lehnhoff MS Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.Product images are for illustrative purposes only and may differ from the actual product.
EH Forest grab with the rotator R3CFS suitable for the excavator class from 3 to 4 tonnes.
Basic parameters:
1. All elements made of steel S355J2
2. Hydraulic rotator
3. Protected arrangement of hydraulic components including cylinders
4. Easily accessible lubrication points for easy routine maintenance
5. Load-holding valve keeps the pressure in the cylinder when the hose is damaged
Technical specification – grabs:
1. Operating pressure: 200 Bar
2. Max load: 600 kg
Technical specification – rotating system:
1. Torque: 10 kN
2. Max working pres.: 250 bar
3. Rec flow rate: 20 L/min
Technical specification – adapter:
1. Pin diameter: 25 mm
2. Head width: 60 mm
Check grab adapters in our SHOP
All products are delivered with a nameplate and bear the CE marking.
We provide a 12 month warranty on the welds.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
More information:
Internal no.: L0707221
Type: clamshell bucket
Manufacturer: SBL Greifertechnik
Year of construction: 2006
Pin diameter: 70 mm
Head width: 100 mm
Clamshell width: 1400 mm
Opening dimension: 2240 mm
Capacity: 1250 l
More informations about our attachments can be found here.
On our YouTube channel You will find videos with our attachments.
Deutsch
