Offered digging bucket suitable for SMP T620 is 850 mm wide.
Additional information:
Internal no.: L0806224
Type: digging bucket
Adapter: suitable for SMP T620
Width: 850 mm
Opening dimension: 1150 mm
Volumen: ca. 0,99 cbm
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Hydraulic ditch cleaning bucket suitable for Lehnhoff MS10 / 1800 mm / cat. 2G / with bolt-on cutting edge:
Offered EH hydarulic ditch cleaning bucket with a an adapter MS10 to suit excavators from 11 to 14 tonnes is 1800 mm wide and has a capacity of 480 liters.
Basic parameters:
1. Rear wall and side wall made of steel S355J2
2. Cutting edge made of HARDOX HB400, dimensions: 200×20 mm
3. Bolt-on cutting edge made of HARDOX HB400, dimensions: 200×20 mm
4. Side cutting edge made of steel S355J2
5. Flat bottom with back cutting edge
6. Adapter*: MS10
7. Strengthening on the inside
8. Two hydraulic cylinders from our own production
9. Replaceable bronze bushing
*Other adapters possible, e.g. Lehnhoff MS, Verachtert CW, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and bear the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
Offered hydraulic ditch cleaning bucket with a an adapter MS03 is 1500 mm wide and has a capacity of ca. 0,25 cbm.
Additional information:
Internal no.: L2604221
Type: hydraulic ditch cleaning bucket
Adapter: MS03
Width: 1500 mm
Opening dimension: 510 mm
Capacity: ca. 0,25 cbm
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Offered EH digging bucket OilQuick OQ70/55 to suit excavators from 17 to 23 tonnes is 1200 mm wide and has a capacity of 1080 liters.
Basic parameters:
1. Adapter*: OilQuick OQ70/55
2. Rear wall and sidewall made of steel S355J2, material thickness: 10 mm
3. Cutting edge made of HARDOX HB500, dimensions: 30×300 mm
4. Side cutting edge made of steel S3355J2 , material thickness: 25 mm
5. Side cutting edge knife made of HARDOX HB400, material thickness: 10 mm
6. Wear protection plates on the sidewalls made of HARDOX HB400, material thickness: 10 mm
7. Outside bottom wear strips made of HARDOX HB400, material thickness: 10 mm
8. With 5 teeth CAT J300
*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
Offered EH hydraulic ditch cleaning bucket to suit excavators from 14 to 19 tonnes is 1800 mm wide and has a capacity of 583 liters.
Basic parameters:
1. Rear wall and side wall made of steel S355J2
2. Cutting edge made of HARDOX HB500, dimensions: 200×20 mm
3. Bolt-on cutting edge made of HARDOX HB500, dimensions: 200×20 mm
4. Side cutting edge made of steel S355J2
5. Flat bottom with back cutting edge
6. Adapter*: OilQuick OQ65 (equipped with: 2 plug 1/2”, 3 poly plug 3/4”)
7. Strengthening on the inside
8. Two hydraulic cylinders
9. Replaceable bronze bushing
*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and bear the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
Offered EH digging bucket suitable for CW30 to suit excavators from 17 to 23 tonnes is 1200 mm wide and has a capacity of 1080 liters.
Basic parameters:
1. Adapter*: suitable for CW30
2. Rear wall and sidewall made of steel S355J2, material thickness: 10 mm
3. Cutting edge made of HARDOX HB500, dimensions: 300×30 mm
4. Side cutting edge made of steel S3355J2 , material thickness: 25 mm
5. Side cutting edge knife made of HARDOX HB400, material thickness: 10 mm
6. Wear protection plates on the sidewalls made of HARDOX HB400, material thickness: 10 mm
7. Outside bottom wear strips made of HARDOX HB500, material thickness: 10 mm
8. With CAT J300
*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
Offered EH digging bucket with a an adapter suitable for CW05 to suit excavators to 2 tonnes is 400 mm wide and has a capacity of 39 liters.
Basic parameters:
1. Rear wall and sidewall made of steel S355J2, material thickness: 6 mm
2. Cutting edge made of HARDOX HB400, dimensions: 150×16 mm
3. Side cutting edge made of steel S3355J2, material thickness: 12 mm
4. Side cutting blade made of HARDOX HB400, material thickness: 5 mm
5. Adapter*: suitable for CW05
6. Without teeth
7. Water drainage holes
*Other adapters possible, e.g. suitable for Lehnhhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
Hydraulic ditch cleaning bucket without adapter / 2400 mm / cat. 5G / with bolt-on cutting edge:
Offered EH hydarulic ditch cleaning bucket without adaper to suit excavators from 24 to 29 tonnes is 2400 mm wide and has a capacity of 1059 liters.
Basic parameters:
1. Rear wall and side wall made of steel S355J2
2. Cutting edge made of HARDOX HB500, dimensions: 250×30 mm
3. Bolt-on cutting edge made of HARDOX HB500, dimensions: 250×25 mm
4. Side cutting edge made of steel S355J2
5. Flat bottom with back cutting edge
6. Adapter*: –
7. Strengthening on the inside
8. Two hydraulic cylinders from our own production
9. Replaceable bronze bushing
*Other adapters possible, e.g. suitable for Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.
We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and bear the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
Offered hydraulic ditch cleaning bucket with a an adapter Lehnhoff MS08 is 1800 mm wide and has a capacity of ca. 0,32 cbm.
Additional information:
Internal no.: L1104225
Type: hydraulic ditch cleaning bucket
Adapter: Lehnhoff MS08
Width: 1800 mm
Opening dimension: 480 mm
Capacity: ca. 0,32 cbm
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Offered EH digging bucket OilQuick OQ70/55 to suit excavators from 17 to 23 tonnes is 1200 mm wide and has a capacity of 1420 liters.
Basic parameters:
1. Adapter*: OilQuick OQ65
2. Rear wall and sidewall made of steel S355J2, material thickness: 10 mm
3. Cutting edge made of HARDOX HB500, dimensions: 30×300 mm
4. Side cutting edge made of steel S3355J2 , material thickness: 25 mm
5. Side cutting edge knife made of HARDOX HB400, material thickness: 10 mm
6. Wear protection plates on the sidewalls made of HARDOX HB400, material thickness: 10 mm
7. Outside bottom wear strips made of HARDOX HB400, material thickness: 10 mm
8. With 6 teeth CAT J300
*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Miller, Schaeff, JCB, Cat, Zeppelin ZM, Volvo S, Liebherr SW, Atlas SMP, Terex, Hitachi ZX.
We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
Offered EH front shovel is 2000 mm wide and has a capacity of 0,93 cbm.
Basic parameters:
1. Adapter*: suitable for CAT 908H
2. Sidewall made of steel S355J2, material thickness: 10 mm
3. Rear wall made of steel S355J2, material thickness: 6 mm
3. Cutting edge made of HARDOX HB400, material thickness: 20 mm
5. Side cutting edge made of HARDOX HB400, material thickness: 20 mm
We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
Used hydraulic folding shovel is 2000 mm wide.
Additional information:
Internal No.: L2703216
Type: hydraulic folding bucket
Adapter*: suitable for Liebherr 507
Width: 2000 mm
Opening dimension: 950 mm
Volume: 900 liters
Weight: 710 kg
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Offered EH front shovel is 2000 mm wide and has a capacity of 0,93 cbm.
Basic parameters:
1. Adapter*: suitable for Liebherr 507
2. Sidewall made of steel S355J2, material thickness: 10 mm
3. Rear wall made of steel S355J2, material thickness: 6 mm
3. Cutting edge made of HARDOX HB400, material thickness: 20 mm
5. Side cutting edge made of HARDOX HB400, material thickness: 20 mm
We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
Used front loader shovel is 2250 mm wide.
Additional information:
Internal No.: L3008212
Type: front bucket
Width: 2250 mm
Opening dimension: 1100 mm
Capacity: 1,6 cbm
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Used front shovel is 1900 mm wide.
Additional information:
Internal No.: L0110204
Type: front shovel
Width: 1900 mm
Opening dimension: 1000 mm
Capacity: 1,48 cbm
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Offered multi purpose bucket suitable for Atlas 75E is 1900 mm wide and has a capacity of 0,85 cbm.
Additional information:
Internal no.: L2309203
Type: Multi purpose bucket
Adapter: suitable for Atlas 75E
Width: 1900 mm
Opening dimension: 750 mm
Capacity: ca. 0,67 cbm
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Offered EH front shovel suitable for wheel loader Volvo L150 is 3000 mm wide and has a capacity of 4,3 cbm.
Basic parameters:
1. Adapter*: pin-on (passend for Volvo L150)
2. Sidewall made of steel S355J2, material thickness: 8 mm
3. Rear wall made of HARDOX HB400, material thickness: 10 mm
3. Cutting edge made of HARDOX HB500, dimensions: 300×35 mm
5. Side cutting edge made of HARDOX HB400, material thickness: 20 mm
6. Bottom wear plate made of HARDOX HB400, material thickness: 30 mm
7. Bolt-on cutting edge made of HARDOX HB500, dimensions: 300×30 mm
We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
Offered EH Front shovel with is 2000 mm wide and has a capacity of 1,1 cbm.
Basic parameters:
1. Sidewall made of steel S355J2, material thickness: 6 mm
2. Rear wall madeof steel S355J2, material thickness: 6 mm
3. Cutting edge made of HARDOX HB500, dimensions: 200×20 mm
4. Side cutting edge made of HARDOX HB450, material thickness: 20 mm
5. Bottom wear plate made of HARDOX HB400, material thickness: 8 mm
6. Welded teeth
Suitable for: CAT 906 907 908; KOMATSU WA70 WA80 WA100; VOLVO L30 L35; LIEBHERR L506 L507 L508 L509 L510
We provide a 12 month warranty on the welds.
All products are delivered with a nameplate and the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
Used front shovel /Volvo L45/ is 2250 mm wide.
Additional information:
Internal No.: L2307181
Type: front bucket
Width: 2250 mm
Opening dimension: 920 mm
Capacity: 1,1 cbm
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
The EH hammer plate with hole pattern to suit excavators from 10 up to 19 tonnes
Basic parameters:
1. Base plate material thickness: 30 mm
2. Hole pattern made according to given dimensions
We also offer the hammer plates without a hole pattern.
We provide a 12 month warranty on adapters.
All products bear the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The EH hammer plate with hole pattern to suit excavators from 4 up to 11 tonnes
Basic parameters:
1. Base plate material thickness: 20 mm
2. Hole pattern made according to given dimensions
We also offer the hammer plates without a hole pattern.
We provide a 12 month warranty on adapters.
All products bear the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The EH welded adapter suitable for MS01 SY without baseplatesuitable for the excavator class to 2 tonnes.
Basic parameters:
1. Sidewall made of steel S355J2, material thickness: : 10 mm
2. Inner width: 185 mm
3. Pin diameter: 40 mm
In our shop you can find welded adapters without baseplate and with SY-Sytem as well.
We provide a 12 month warranty on adapters.
All products bear the CE marking.
More information about our products can be found <a href=”https://www.euroholz-hagen.de/bagger-loeffel-anbauteile/”>here</a>.
You can also find videos about our excavator attachments on our <a href=”https://www.youtube.com/channel/UCAUM1aXrOhBpYVAo8VYXOxg”>YouTube</a> channel.
Product images are for illustrative purposes only and may differ from the actual product.
Hydraulic adapter for the excavator class from 25 to 43 tonnes.
Basic parameters:
1. OilQuick OQ80 (equipped with: 2 plugs 1/2”, 2 poly plugs 3/4”, 2 plugs 1”)
2. With distribution block and 4 hoses to the block
3. With hole pattern
4. Weight: 390 kg
5. All plugs will be delivered in a box.
We provide a 12 month warranty on adapters.
All products bear the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The EH welded adapter suitable for MS21 / MS25 suitable for the excavator class from 21 to 41 tonnes.
Basic parameters:
1. Sidewall made of steel S355J2, material thickness: 30 mm
2. Baseplate made of steel S355J2, material thickness: 30 mm
3. Inner width: 505 mm
4. Pin diameter: 80 mm
We provide a 12 month warranty on the welds.
All products bear the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
The EH adapter plate with rotating load hook suitable for Volvo S60 allows the taking up of craneable goods with the excavator and is suitable for the excavator class from 12 to 18 tonnes.
Basic parameters:
1. Adapter: suitable for Volvo S60
2. Rotatable load hook, max. load: 10,5 tonnes
*Other adapters possible, suitable for e.g. Lehnhoff MS, Verachtert CW, OilQuick OQ, Martin, Volvo S, Liebherr SW, Atlas SMP usw.
Alle von uns hergestellten Anbauteile haben eine 12-monatige Garantie auf die Schweißnähte.
Mehr Informationen über unsere Anbauteile finden Sie hier.
Videos über unsere Anbauteile finden Sie auch auf YouTube.
Produktbilder sind nur für illustrative Zwecke und können vom tatsächlichen Produkt abweichen.
Hydraulic adapter for the excavator class from 5 to 12 tonnes.
Basic parameters:
1. OilQuick OQ60-5 (equipped with: 2 plugs 1/4”, 1 poly plug 1/2”, 2 plugs 3/4”)
2. With distribution block and 4 hoses to the block
3. With hole pattern
4. Weight: 144 kg
5. All plugs will be delivered in a box.
We provide a 12 month warranty on adapters.
All products bear the CE marking.
More information about our products can be found here.
You can also find videos about our excavator attachments on our YouTube channel.
Product images are for illustrative purposes only and may differ from the actual product.
Deutsch
